Solid Pine Panel Craft Board 27 x 300 x 1200mm

A step-by-step guide to making and fitting a pine board shelf, using Richard Burbidge pine board and basic woodworking tools and techniques. Step 1. Choose your pine board and brackets Firstly you’ll need to decide the style you’re going for – we recommend our pine board for this project. Our flat sheet pine panels are available in a variety of different sizes and thicknesses, with a board to suit every requirement. View our selection of pine board here. You will also need to select your brackets, which can be found at any hardware store. Opt for metal brackets for an on-trend industrial style, or select timber brackets for a natural and rustic look. For the more advanced DIY enthusiasts, you may opt to create your own timber brackets. You can do this using pine board and a coping saw. Also consider the weight of the items you will be placing on the shelf, you will need to select heavy duty brackets for weighted items. Step 2. Cut to size and add your creative flair to your shelf Depending on the size of pine board you have selected, you may wish to cut your pine board to your desired length. You can do this using a mitre box and saw.  Next, if you wish to decorate your shelving, you can either paint, wax or stain depending on your desired look. For a smooth finish you can sand down your pine board. You can also add a decorative cover around your shelf, you can do this using decorative mouldings. We used DEC6014 for a more put together finish. View our range of decorative mouldings here. These steps are entirely optional and all depend on the final look you are striving for. This project can be customised to work with any décor, in any room. There’s an endless list of ways that you could choose to add your own creative flair. Step 3. Decide where to place your shelves Next, consider where you will be placing your shelves. Ensure you use a pipe and cable detector before nailing or drilling into any walls. You must also consider the type of wall you have. When fixing to a masonry wall you will need a masonry drill and wall plugs. If fixing to a stud wall, use a stud detector to locate the vertical timber studs, you will not require wall plugs with a stud wall. Ensure that you wear safety glasses and gloves when drilling. Step 4. Fit brackets to wall We recommend fitting the brackets to the wall first. Use a spirit level to make sure your bracket is straight, mark the holes onto the wall with a pencil, and then drill into the wall. Fit wall plugs into the drilled holes if you have masonry walls. Then, fit the bracket into the drilled holes by using screws and a screw driver. Repeat this process for the other bracket, again using a spirit level to ensure the brackets are perfectly aligned. Step 5. Fit board to brackets Next, hold up your pine board onto your brackets to determine where the bracket holes will be on your pine board. Take a pencil and mark these holes. Remove the pine board, and drill pilot holes into the shelf, ensuring you don’t drill through the board. Lastly, attach the board with screws and your shelf should be up and ready! Step 6. Share your DIY renovation project We love seeing how you have transformed your home with Richard Burbidge. Upload a picture of your DIY project to Instagram or Facebook and tag us @richard_burbidge. You can also upload your images to our testimonials page here. We can’t wait to see what you create with Richard Burbidge mouldings!